Home > Registration Rejected > Registration Rejected Error Dbconfig Cucm 6

Registration Rejected Error Dbconfig Cucm 6

Contents

Open a Command Prompt and go to the directory C:\utils. Obtain the configuration file. The configuration on IP Comm as well as in CallManager 7 is correct but this error comes up every time. Posts: 38 | From: US | Registered: Apr 2009 | IP: Logged yeungd Guru Member # 25221 Rate Member posted October 17, 2009 11:53 PM http://supercgis.com/registration-rejected/registration-rejected-error-dbconfig-cucm-7.html

Try these solutions: > > •Ensure that device record that you have created matches the device name > chosen with Cisco IP Communicator (*right-click > Preferences > Network *tab). > > Any IP parameters that you have hard coded on the phones override the parameters that the DHCP server provides. This is a required field. I would verify the TFTP address and DHCP settings.

Cucm Registration Rejected

Press 1. Cisco 7940 and 7960 Complete these steps on the Cisco 7940 and 7960: Choose Settings. This allows you to see all the packets that the phone sends and receives during the boot and registration process.

Btw, if > the user wanted to keep Windows Firewall on, what ports would he need to > open to have IP Comm work? > > > > Thanks, > > Auto-Registration DN’s are completely filled up You also may have residual security config on your IP Phone that is no longer needed (factory reset will cure this) Tags: IP Phone Boot Have anyone seen this and if so do you know of a work around? Cucm Phone Status Rejected Posts: 213 | From: Hong Kong | Registered: Apr 2008 | IP: Logged Sunrise Specialist Member # 27995 Member Rated: posted November 15, 2009 08:58 AM

Note:If you have your Cisco CallManager servers set up in a cluster, every server has the configuration files for every phone that is in the Publisher database. Cisco 7940 Registration Rejected There is only one true test of packet level connectivity for devices on different subnets/VLANs; you must take a network trace from the subnet/VLAN for each device. Have anyone seen this and if so do you know of a >> work around? >> >> Thanks, >> Ruben Trujillo >> IT Telecom >> >> >> _______________________________________________ >> cisco-voip mailing Choose Settings, and choose 6 (Network).

The default value is 30 and the maximum is 1000. Cisco Phone Not Registering The configuration on IP Comm as well as in CallManager 7 is correct but this error comes up every time. The phone programs the new information into flash memory and resets. Change the hostname under Server in CUCM to the IP Address of that server.  Otherwise when the IP Phone downloads its configuration file, the hostname of either the Primary or Secondary

Cisco 7940 Registration Rejected

I now have one user who has installed IP Comm version 7.0.2 and is getting the error "Registration Rejected: Error DBConfig". http://collaboration-ie.com/index.php?/topic/921-registration-rejected-error-dbconfig/ Powered by Blogger. Cucm Registration Rejected The IT Prostitute: Working For An IT Services Comp... Troubleshooting Cisco Ip Phone Registration Problems ACME Net-Net: How To Delete Specific Config Cisco Emergency Responder: How To Configure CER Wi...

SIP user agent (SIP Phones) do require a configured NTP Reference. his comment is here This disables DHCP. All rights reserved. Cisco CallManager and TFTP Services Do Not Run Another possible problem is that the Cisco CallManager service, the Cisco TFTP services, or both do not currently run. Cucm 10.5 Registration Rejected

The result was as follows: The very next packet is a Reset/ACK from that address. Search for the IP address of the phone with which you have problems. Choose the server to which the IP phones are registered, and choose the Cisco RIS Data Collector service. http://supercgis.com/registration-rejected/registration-rejected-error-dbconfig-cucm-8-5.html On the Cisco CallManager server, check to be certain that the local host files map the correct Cisco CallManager server name to the IP address.

Not always, just usually. Cisco 7945 Registration Rejected Error Mismatch In the Primary Collector field, enter the hostname/IP address of the publisher. After you have completed these steps, power cycle the phone.

In this way, a phone can obtain the configuration from a different Cisco CallManager (TFTP) server than that with which the phone ultimately registers.

Register now! I appreciate your assistance Back to top Report Thanked by 1 Member: #7 skeaf2013 skeaf2013 Member Members 17 posts 0 thanks Posted 29 January 2015 - 09:20 AM I This isn't one of those posts where you can just go to the config and get the answer r... Cisco 7841 Registration Rejected Add Phones to Cisco CallManager For Cisco CallManager version 2.4, refer to Adding a Cisco IP Phone.

Configure the IP address/mask, Default Router 1, and any other IP parameters that you require. However, a ping that fails does not necessarily tell you anything. The phone then requests the file with the name SEPDEFAULT.cnf. http://supercgis.com/registration-rejected/registration-rejected-error-dbconfig-cucm-8.html Change Directory services URL under Enterprise Parameters to the IP Address of the Publisher, instead of using the Hostname, to ensure that they are reachable.

If you have configured the Cisco CallManager server for Auto-Registration, this file exists and the server sends it to the phone. See More 1 2 3 4 5 Overall Rating: 0 (0 ratings) Log in or register to post comments Carlo Poggiarelli Wed, 03/27/2013 - 09:57 Hi Mohammad.Glad to Help.Please rate helpful